Moneta in Stripes

I have recently seen so many gorgeous knit maxi dresses on the web, that I thought it was time I made one too. I was especially impressed by a number of dresses made by some curvier ladies, that looked amazing. So after some mulling over, I decided to use the Moneta dress pattern by Colette Patterns.

The instructions are great, and the pattern is simple and quick. If you’re new to knits, this shouldn’t give you much trouble and there is a Moneta sew along, just starting. It’s also very quick to assemble.

I used a lovely, springy bamboo jersey by Telio that I bought locally. It’s amazing, and I will definitely use it again, in all the colours possible.

Moneta Dress
The dress has pockets, which I really like. It looks short in this photo, but it’s ankle-length. I’ve seen longer, but I like to avoid tripping on my dress.

I sewed the XL, based on my measurements, but it was huge. I ended up taking in the sleeves by two inches and the sides of the bodice by an inch on each side. I could have taken a bit more in the sleeves, and a tiny bit more at the waist. I probably should have cut the medium with a fake FBA (to the size large).

I’ve seen at least one review that recommended using the sleeve in a size smaller than the dress, and I agree, this would be a good idea. I thought the bodice looked short, but with the weight of the skirt, the length was perfect (I’m a bit long waisted too). I extended the skirt by 12 inches, to make a maxi dress, but I didn’t keep the angle, as others have, keeping the same dress width at the bottom.

Moneta Dress
I changed the neckline

The instructions have you gather the skirt using clear elastic. I’ve seen at least one review that noted this was difficult. I had no trouble. But I had to recut the skirt a bit (more on that later), and I was out of clear elastic, so I used lingerie elastic. This is much, much easier as it doesn’t slide around. I added clear elastic to the shoulder seams though, which wasn’t in the instructions.

After taking the dress in, I had two main problems: the first was the neckline. Did it look like the pattern photo and technical diagram? Absolutely! And was it flattering? Absolutely not. It’s just the neckline to show off my bad curves, and hide my good ones. In the end I recut the neckline into more of a scoop neckline and lowered it by 2.5 inches. I could have lowered it more. I also used a band to hem the neckline (like in the Renfrew top by Sewaholic) – tutorial here. My double needle broke, which is why I did this, but I prefer the look, in any case.

Moneta Dress
I changed the way the skirt is cut, so the stripes would be aligned.

My second problem was with the stripes in the skirt. The skirt panels are not rectangles, but curved at the top and bottom. I think this might be to have a prettier hemline with a shorter skirt. However, with stripes, it means that the stripes near the waist will appear to curve down at the sides of the dress. You can see it in the pattern photos on the Colette website, if you look carefully. You would only notice this with stripes. It also means that if your fabric panels are cut the slightest bit off, or if the gathering is uneven, the skirt will appear crooked. In the end, I recut the skirt to be straight on both the top and bottom, because the curved stripes really bothered me.

And in the end? Even with the fitting modifications (and the fit is good), I don’t think the dress is especially flattering – on me. I’ve seen lots of versions of this dress, on a lot of different figures, and they look lovely. On me, though, the gathered shirt emphasizes  exactly where I need to loose a little weight (sigh).  A better silhouette for me would have shorter cap sleeves, or 3/4 sleeves, a lower scoop neckline, and less gathering at the waist, and I think I’ll stick with a solid next time. It is, however, the most comfortable dress I have ever owned. So overall, a great pattern, but not ideal for my figure.

Moneta Dress
Moneta Dress

I’m a bit discouraged, to be honest. I was hoping this would be a great, easy (it is easy!), go-to summer dress. But I think I have to keep looking. I’ve just cut out Vogue 8825 in black , which I think might look better on me. And I’ve bought the Lady Skater by Kitchy Coo, as well. Hopefully I’ll have more luck with one of those. Wish me luck!

This post is part of The Monthly Stitch Indie Pattern Month sew-along.


Pattern Review: Moneta by Colette Patterns.

Fabric: Striped bamboo jersey by Télio.

Sizes: XL.

Sewing Level: Intermediate.

Cost: Pattern: $14, fabric about $30.

Modifications: I took in the sleeves by 2 inches and the sides of the bodice by 1 inch per side. I lowered the neckline by 2.5 inches and made it a bit more scooped. I used a fabric band on the neckline. I reshaped the skirt so that the stripes would be straight at the top of the skirt and I lengthened the dress by 12 inches. I used lingerie elastic at the waist, and clear elastic at the shoulders.

Results: Great pattern, but not ideal for my figure.

Ginger for Fall

I have been slowly rebuilding my wardrobe with some basic everyday clothing. After four pregnancies, all pretty close together, my wardrobe is in rough shape. I’ve also changed shape, and so my old clothes just don’t fit right. Rather than battle the clothes racks with four kids in tow, I’ve decided to make what I can.

This is my latest project, the Ginger skirt by Colette.  It’s a simple, high-waisted a-line shirt, fitted  in the hips with an invisible zipper.

Ginger skirt by Colette, as sewn by The Finished Garment
Me in my Ginger skirt.

I used a super soft baby cord, which is the same fabric I used to make pants for my kids. They think this is hilarious. Ha! Just wait till high school, kids.

I cut the size 18, based on my waist measurements, but I ended up taking in two inches, and I could have taken it a bit more in the hips. Next time, I’ll cut a 14, graded out to a 16 waist.

At first I thought the 18 looked ok. But it wasn’t lying smooth over the front of my hips. So I scoured the internet looking for similar body shapes, in the same skirt, and with the same problem, and they all had their skirts quite low on the waist. So I raised the waist and took in the sides and the skirt fit so much better. It was a whole new garment. I’m honestly not used to such a high-waisted skirt. Most ready-to-wear a-line skirts are designed to sit lower, but I do like the look. Next time, I’ll also take the skirt in a little more in the hips.

Ginger skirt by Colette, as sewn by The Finished Garment
I took this photo before I raised the waist and took in the waistband. You can see how it’s not smooth in the front.
Ginger skirt by Colette, as sewn by The Finished Garment
This photo was taken afterwards, and it fits so much better.

Adjusting the fit was quite easy. So if you are a bit larger than the largest size (or smallest than the smallest size), you shouldn’t have too much trouble grading up (or down) a size or two and still getting good results.

Ginger A-line Skirt Pattern by Collette Patterns
Ginger A-line Skirt Pattern by Colette Patterns.

I made version 3, which has a straight waistband , and is cut on the bias. With baby cord, the results are not quite as dramatic as the chevron stripe pattern shown on the pattern packaging, but it does make for a really nice hanging skirt. Even my husband mentioned that it hung really nicely, and with no prompting (!!!). Using baby cord also means you don’t need to worry about matching the stripes.

Ginger skirt by Colette, as sewn by The Finished Garment
You can just see how the bias cut skirt makes a chevron pattern, but it’s very subtle in baby cord.

The skirt has an invisible zipper, which went in really easily.

Ginger skirt by Colette, as sewn by The Finished Garment
What do you think? Is that zipper invisible enough for you?

I added some very thin tricot interfacing to the skirt before adding the zipper, to stabilize it.   But because the skirt was cut on the bias, it was still a little stretchy, so  I also used bias tape on the seam edges, a suggestion from a couture sewing book, and this worked very well.

Ginger skirt by Colette, as sewn by The Finished Garment
Here you can see the inside of the invisible zipper where I’ve used bias table to help stabilize.

Hemming was a bit of an adventure. I let the skirt hang for a few days before I started. I had read how Sunni of A Fashionable Stitch has Mr Stitch help her with her hemming. So I gave it a shot. I can now confirm, that while Mr Garment has many superpowers, garment hemming is not one of them. He’s pretty good with compliments though (see above). Needless to say, I had to re-hem. Luckily, my hems usually fall pretty straight, so I guess I’ll just continue t0 hem on my own. I think next time, I’ll go a couple inches shorter as well. What do you think?

I didn’t line the skirt and simply zigzagged the seams. It’s a corduroy skirt, after all.

Ginger skirt by Colette, as sewn by The Finished Garment
I used quilting cotton to line the waistband, since it’s pretty and more comfortable and cuts down bulk.

At first I was a bit shocked by the price of the pattern. I paid $18, which, for a simple a-line skirt pattern, is a lot. (You can get the PDF version for $12, which is better). But I wanted to try a Collette pattern (this is my first), and it was a gift as well (though I picked it out myself). I’ve found that the fit is really quite nice, and I will use the pattern again, so overall, still a worthwhile purchase.

Ginger skirt by Colette, as sewn by The Finished Garment
I tried to get another photo session organized, but what are those white marks on my skirt?
Ginger skirt by Colette, as sewn by The Finished Garment
Oh you think that’s funny? (Those white marks are tiny hand prints made of baby powder). Thanks kid!

I really like this pattern. It has a really nice fit, and is quick to sew, but also has a lot of room for creativity, if you are feeling up to a challenge. I’ll almost certainly make it again.


Pattern Review: Ginger skirt by Colette Patterns.

Fabric: Baby cord. I used quilting cotton for the waistband.

Sizes: 18, but next time I’ll cut a 14, graded out to a 16 waist.Version 3, with the straight waistband, and cut on the bias.

Sewing Level: Beginner (versions 1 & 2). Intermediate (version 3).

Modifications: None.

Results: Great. I would recommend this pattern and plan to make it again..